This is the OS Engines GT22 Gasoline Powered Engine with Muffler and Rear Mounted Carburetor.
FEATURES |
INCLUDES |
GT22 Engine with Muffler, Electronic Ignition Module, CM-6 Spark Plug Muffler Gasket, Muffler Bolts and Instruction Manual
REQUIREMENTS |
2-cycle oil with a mix ratio of 50:1 if using Klotz model oil (if using other brand, follow manufacturer's mix ratio or if no
recommendation, mix at 30:1)
Ignition Battery: 4-6 cell NiCd, NiMH, or 2-cell LiPo
LiPo battery requires voltage regulator
Propeller: 16x8, 16x10, 17x6, 17x8, 15x10 for break-in
Gasoline safe fuel tubing and fuel filter
SPECIFICATIONS |
Displacement: 1.35 cu in (22 cc)
Bore: 1.26" (32mm)
Stroke: 1.08" (27.5mm)
Practical RPM Range: 1,800 - 9,000
Output: 2.66 hp @ 9,000 RPM
Weight:
Engine: 26.86oz (761.6g)
Muffler: 4.68oz (132.6g)
Ignition Module: 3.7oz (105g)
Initial Needle Positions: High Speed Needle-two turns open
Low Speed Needle-one and a half turns open
Distance Between Mounting Hole Centers Same Side: 0.98" (25mm)
Distance Between Mounting Hole Centers Opposite Side: 2.2" (57mm)
Mounting Hole Diameter: 0.197" (5mm)
Length of Muffler Can: 3.9" (100mm)
Width at Mounting Tabs: 2.7" (70mm)
Width of Crankcase Below Mounting Tabs: 1.9" (49.4mm)
Height from Crankshaft Center/top of Cylinder Head: 3.7" (94mm)
Height from Crankshaft Center/Muffler Mounting Hole Centers:(48.4mm)
Length from Drive Hub to Carburetor: 5.5" (139.5mm)
Length from Drive Hub to Center of Crankcase: 2.7" (68.5mm)
Length from Center of Crankcase to Carburetor: 2.8" (71mm)
Crankshaft Size: 5/16-24 UNF-2A