A lean, mean metal machine!
The 1/24 Heavy Dump Truck Limited Edition 4WD Kit takes “heavy metal” to a whole new level! Highlights include body parts molded in black, metal-chassis parts, unique sticker designs, a GF-01 monocoque resin chassis with wheelie bar, a Sport-Tuned RS-540 brushed motor, a TBLE-02 ESC, an ABS plastic cab and rear bed, pin spike rubber tires, metal-plated plastic wheels and much, much more.
GF-01 lightweight monocoque resin chassis with wheelie bar.
4-wheel dogbone driveline.
Sport-Tuned, center-mounted RS-540 brushed motor.
TBLE-02 ESC.
ABS plastic cab and rear bed. The bed may be displayed in a 'flat' or 'raised' position by changing the position of the two stays and snap pins in the body mounts.
Plastic-bodied friction shocks.
Bellcrank steering.
Four-wheel independent double wishbone suspension.
Bevel gear differentials.
Sealed gearboxes.
Spring-loaded front bumper.
18T pinion gear.
2.5" (65 mm) wide, 4.5" (115 mm) diameter lug and pin spike rubber tires.
2.3" (58.5 mm) wide, 1.9" (49 mm) diameter metal-plated plastic wheels with 12 mm hex.
Non-adjustable camber.
Adjustable caster/toe in.
This is the Electric Powered, Radio Controlled 1/24 scale
Limited Edition Heavy Dump Truck Kit from Tamiya.
**Body parts are molded in black, with metal-plated chassis**
**parts and new sticker designs.**
FEATURES
Chassis: GF-01 lightweight monocoque resin with wheelie bar to
prevent flipping over backward during wheelies
Drive: 4 wheel, dogbone driveline
Motor: Tamiya Sport Tuned RS-540 brushed, center mounted
Electronic Speed Control: TBLE-02
Differentials: Bevel gear type
Gearboxes: Sealed
Cab and Rear Bed: ABS plastic, black in color, bed may be displayed
in flat or raised position by changing the position of the two
stays and snap pins in the body mounts. It is not advisable to put
objects in the rear bed, or drive the model with the bed elevated
**bed is not remote controlled**
Front Bumper: Spring loaded
Shocks: Plastic body friction, not oil-filled
Suspension: Four wheel independent double wishbone
Tires: Rubber, lug and pin spike 2.5" (65mm) wide, 4.5" (115mm)
diameter
Wheels: Metal plated plastic 1.9" (49mm) diameter, 2.3" (58.5mm)
wide, 12mm hex
Steering: Bell crank type
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Adjustable, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
in relation to the chassis
INCLUDES
Heavy Dump Truck Kit with Brushed Motor, ESC, Shocks, Decal Sheet,
Tires, Wheels, 18T Pinion Gear and Instruction Manual
REQUIREMENTS
Radio: 2-channel with high-torque steering servo
Battery: 7.2V NiMH battery with Standard connector
Charger: To match selected battery
AA Cells: For transmitter
Building and Track Equipment
SPECIFICATIONS
Length: 13.8" (350mm)
Width: 10.6" (270mm)
Height: 8.3" (210mm)
Wheelbase: 6.8" (174mm)
Tread: 7.6" (194mm) distance between center of tires measured
side-to-side