DR10 Drag Race Car RTR Orange

• Based on the 9-time R.O.A.R. National Champion short-course race truck platform
• 2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
• Three-position wheelie bar with optional large wheels
• High-torque, metal-gear Reedy servo with spring style servo saver
• Powerful Reedy 3300kV brushless motor
• Reedy 3300kV brushless motor
• Lightweight front drag tires
• Durable and lightweight aluminum top shaft

• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs
• Metric hardware throughout
• 18 precision, rubber-sealed ball bearings
• Durable front and rear wide body mounts
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
• Adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear
• Many Factory Team options already available!

Overview

Modern street racing's roots go back to Woodward Avenue, Michigan in the 1960s when the three main Detroit-based American car companies were producing high-powered performance cars. A private racing venue was not always available, and therefore the race would be held illegally on public roads.

The DR10 Drag Race Car is based on the 9-time R.O.A.R. Short Course National Championship winning trucks. The DR10 features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as our ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box.

Needed to Complete

• Four (4) AA batteries (#ASC302 Reedy AA Alkaline) used in the transmitter
• NiMH or LiPo battery with High Current T-Plug (#ASC724 Reedy 7-cell WolfPack or #ASC751 Reedy WolfPack LiPo)
• Charger for battery used (#ASC27201 Reedy balance Charger - good for LiPo, LiFe)

What's in the Box?

• (1) DR10 Drag Race Car RTR
• (1) 2.4GHz 2-channel radio
• (1) High-torque, metal-gear Reedy servo
• (1) Reedy Brushless Speed Control
• (1) Product Manual

Video Overview

 

Factory-finished two-piece Reakt drag race body with rear spoiler

 

Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo

 

Aluminum 12mm big bore coil-over shock absorbers

 

Three-position wheelie bar with optional large wheels

 

Rugged steel turnbuckles for adjustable camber and front toe-in

 

Water-resistant enclosed receiver box

 

Rear CVA driveshafts for more reliability

 

Lightweight drag race-inspired wheels with high-grip rear drag slick tires

 

Specifications

Back to Top ^

Approximate Assembly Time

No assembly required

Ball Bearings

18 precision, rubber-sealed ball bearings

Batteries

2S-3S LiPo (sold separately)

Battery Dimensions

L, W, H: 5.5 x 1.8 x 0.96" (139 x 47 x 24.5mm)

Charger

Sold Separately

Chassis

Low center-of-gravity molded composite

Completion Level

Ready-To-Run

Drivetrain

2WD

Internal Gear Ratio

2.6:1

Length

24" (609.6mm)

Motor Type

3300kV brushless motor, Brushless

Radio

Included

Receiver

Included

Scale

1/10

Servos

High-torque, metal-gear Reedy servo with spring style servo saver

Shock Type

Aluminum 12mm big bore coil-over

Speed Control

Included

Suspension

Adjustable suspension geometry

Tire Tread

Slick

Vehicle Type

Drag Racing Car, Dragster

Water-Resistant

Yes

Weight

10.70" (272mm)

Wheelbase

12.68" (322mm)

Width

10.7" (272mm)