The E-flite® ElectroStreak 1.1m is one of the most convenient, best-handling, and fastest prop-driven E-flite aircraft yet! It can reach top speeds of up to 120–130 MPH on 4S, or 100 MPH on 3S, to deliver an unmatched fast-flying experience.
Inspired by the original scratch-built design that was later sold in kit and ARF versions, the E-flite® ElectroStreak 1.1m is designed to include numerous modern-day features and conveniences – along with excellent handling and high-speed performance! It assembles quickly and easily with just a few screws and is conveniently sized to be easy to store and transport without disassembly. It's also easier to launch and land than low-wing high-speed models like the V900, especially the BNF Basic version that's equipped with enhanced AS3X+ and optional-use SAFE Select technologies. And both versions include Spektrum digital, metal-geared servos, a 45A Smart Lite ESC, plus a 3S and 4S compatible motor!
If you have a need for speed the ElectroStreak 1.1m is one of the fastest prop-driven E-flite airplanes ever! With 3S 1800–2200mAh batteries and the factory-installed brushless power system, the ElectroStreak reaches up to 100 MPH — making it a great choice for intermediate pilots with some high-speed flying experience, especially when utilizing the BNF Basic version's enhanced AS3X+ and optional-use SAFE Select with automatic Hand Launch Assist Mode technologies. And more experienced pilots can unleash top speeds of up to 120-130 MPH with popular 4S 1800–2200mAh batteries! The Spektrum Avian 45A Smart Lite ESC lets you fly fast with confidence knowing all is well with the power system and battery due to the real-time telemetry data sent via compatible receivers (including the BNF Basic version's AR631+) to Spektrum AirWare equipped transmitters.
Speed and aerobatic enthusiasts will appreciate the locked-in precision of the four digital, metal-geared servos and ball-link equipped linkages. They make it possible to perform a wide range of sport to high-speed aerobatics, and the optional-use flaperons and spoilerons offer even more capabilities! The sleek airframe is composite reinforced throughout and is molded in high-density EPO that delivers a strong and stiff airframe. Plus, it's factory-finished in a vibrant, high-contrast trim scheme for improved visibility and orientation. No glue is required for assembly, and a total of three screws install the stabilizer plus the one-piece wing that attaches and removes easily for convenient storage and transport. That means you can be ready to enjoy a fast-flying experience unlike any other in less time than it takes to charge a battery!
The Plug-N-Play (PNP) version comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately), plus the transmitter and battery you provide (also sold separately). Simply install the receiver, finish any final assembly, and fly!
The ElectroStreak is factory-equipped with a high-performance brushless power system that gives you the option to choose just how fast you want to go. Use a 3S 1800–2200mAh battery to reach speeds up to 100 MPH. Or go beyond that and reach top speeds up to 120-130 MPH with a 4S 1800–2200mAh battery.
Speed is nothing without the right balance of strength and control. The ElectroStreak's sleek airframe is molded in EPO that's composite reinforced so it's stiff and durable yet is also lightweight. Plus it's equipped with digital, metal-geared servos that deliver the precise control and reliability you need to enjoy flying FAST flight after flight.
No glue is required for final assembly, and you can have the ElectroStreak 1.1m ready to fly in less time than it takes to charge a battery! And although it's conveniently sized to fit fully assembled in just about any vehicle, you can also remove the one-piece wing for even easier storage and transport.
Skill Level 3 aircraft, like this one, are suitable for more experienced RC pilots who already have the skills to assemble, set up, and fly similar class models. This PNP version requires more experience and skills to assemble and fly than the BNF Basic version because you will need to install a receiver that does not already include properly tuned AS3X+ and SAFE Select technologies. You should have the experience and skills necessary to assemble and successfully fly models like the E-flite T-28 Trojan 1.1m, Sportix 1.1m, Conscendo Evolution 1.5m, 64mm and larger EDF, or other similar class models before attempting to fly the ElectroStreak 1.1m PNP version.
| Approximate Assembly Time | 1-3 Hours |
| Battery | Sold Separately |
| CG (Center of Gravity) | 52mm +/-5mm |
| Charger | Sold Separately |
| Completion Level | Plug-N-Play |
| Connector Type | IC3 |
| Lighting | No |
| LiPo Compatibility | 3S, 4S |
| Material | EPO |
| Minimum Required Radio | Full-range 4+ channel transmitter and receiver |
| Motor Size | 3542-1000Kv |
| Motor Type | Brushless |
| Power Type | Electric |
| Product Length | 36.9" (937 mm) |
| Product Weight | Without Battery: 885g (31.2 oz) / Weight with 4S 2200mAh 30C Battery: 1118g (39.4 oz) |
| Propeller Size | 8x8E (APC) |
| Radio | Sold Separately |
| Receiver | Sold Separately |
| Recommended Motor Battery | 3S 11.1V or 4S 14.8V 1800–2200mAh LiPo with EC3 or IC3 Connector |
| Servo Size Category | Sub-Micro |
| Servo Type | Digital |
| Servos | Included |
| Skill Level | Level 3 |
| Speed Control | Included |
| Spinner Size | 1.49" (38 mm) |
| Trim Scheme Colors | Red |
| Wingspan | 43.3" (1100 mm) |
Note: This is not a comprehensive list of all parts or accessories and even though we try our best to keep this list accurate, compatibility is not guaranteed. Please consult the manual for your vehicle, the manufacturer, or contact us here at Hobby Wholesale to confirm compatibility if you are unsure.
If you are looking for a manufacturer part that is not in this list, please contact us for a special order.
