Monokote Neon Pink

Monokote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to "old fashioned" Coverings, Quick To Use.

For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105.

• Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
• Lightweight at Only 0.2 oz/sq ft
• Dry Adhesive Activates When Heat is Applied
• Shrinks to a Drum-Tight Finish As It Cools
• High Gloss Finish
• Fuelproof and Waterproof
• Stronger and Lighter Than Traditional Silk and Dope Coverings
• May be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

One (6' x 26") Roll of Neon Pink Covering
One Instruction Sheet

Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May
Vary Slightly In Color Between Production Runs of These Products.
If Using Three or More Rolls of the Same Color, it is Suggested to
Use a 25' Roll To Ensure the Same Dye Lot for the Entire
Model Being Covered.
LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its
True Color.
LustreKote Paint: NONE
MonoKote Trim Sheet: TOPQ4131

MonoKote is a High Temperature Covering, NOT For Use Directly On Foam
EconoKote IS For Use Directly On Foam, Use the Following:
EconoKote Covering: NONE
(EconoKote may be used on top of, but not under MonoKote.)
Temperature Ranges:
Attaching to Wood: 215 - 240°F (activating the glue)
Partial Shrinkage: 230 - 270°F
Maximum Shrinkage: 270 - 350°F