The performance, style, and value of the SCX24 Jeep Wrangler JLU are now even better than before. Oil-filled shocks, Spektrum electronics, and new body colors have been added for exciting indoor and outdoor adventuring that everyone can enjoy.
No matter where you are, the Axial SCX24 Jeep Wrangler JLU makes it the scene for rock crawling fun. If you’re stuck at work, go crawling on your desk. A messy room becomes a challenging obstacle course. Take your rig outside and set up an exciting trail with a few holes, rocks, and twigs.
Just like the full-size Jeeps that embody adventure, the 1/24 scale SCX24 Jeep JLU is ideal for tackling almost any terrain, indoors or outdoors — and looks great while doing it. It’s completely assembled, fully equipped, and a perfect choice for hobby beginners as well as for experienced Axial RC crawling enthusiasts.
One of the most successful micro rock crawlers of all time, the SCX24 Jeep JLU is also one of the best values in RC. Now, Axial has updated the popular rig to make it even better. Plush oil-filled shocks have been added for a suspension that smoothly absorbs bumps and stays stable over the roughest terrain. Reliable Spektrum electronics are included, and there are two hot new body colors to choose from.
And it still has all the performance advantages of the proven Axial SCX24 platform. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase the ground clearance. Realistic steel frame rails on the C-channel chassis stand up to hard knocks.
The SCX24 Jeep JLU performs like a winner and looks like one, too. The realistic scale body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. Two LEDs in the front bumper light up the trail for night-time crawling. For quick battery access, just remove one clip to tilt back the body.
Inside the box, in addition to the assembled and finished rig, you’ll find a Spektrum 2.4GHz transmitter, 350mAh LiPo battery, and handy USB charger. Four AA batteries are even included for the transmitter. The SCX24 Jeep Wrangler JLU is the complete micro rock crawling package. Think small, and get ready for big Axial adventures!
The front and rear differentials house metal worm gears for durability, increased ground clearance, and strong drag brakes.
Just like the 1/10 scale SCX10 platform, the SCX24 chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned.
The front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24 suspension features a 3-link front and 4-link rear setup.
The rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist.
New oil-filled shocks allow the suspension to articulate smoothly over rough terrain. You can adjust the preload with 1mm, 2mm, and 4mm spacers to fine-tune your rig for your handling needs.
Steel front and rear axles, front stub axles, and dogbones provide the strength and durability needed to keep going during tough climbs and over rough trails.
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
The included Dynamite 88T 030-size brushed electric motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and help protect the gears.
The Spektrum SLT2 2-channel radio system offers high-end features such as throttle/steering travel adjust and throttle limiting. The ready-to-run package is so complete, even AA transmitter batteries are included.
Just because the SCX24 is small doesn't mean its features follow suit. There are no bushings here. The drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle.
Like the full-size Jeep Wrangler JLU, the Axial SCX24 Jeep Wrangler JLU embodies adventure. Its detailed scale body comes factory-finished in two new color options. For quick battery access, just remove one clip to tilt back the body.
| Product Width | 3.9" (99 mm) |
| Radio | Included |
| Ball Bearings | Full |
| Chassis | Stamped Steel Chassis Rails |
| Completion Level | Ready-To-Run |
| Drivetrain | 4WD |
| Drive Type | Forward/Brake/Reverse |
| Product Height | 4.1" (104 mm) |
| Tire Tread | Nitto Trail Grappler M/T |
| Vehicle Type | Rock Crawler |
| Battery | Included |
| Connector Type | PH 2.0 (High-Current Ultra Micro) |
| Ground Clearance | 1.0 in (25.5mm) |
| Motor Size | 030 |
| Product Length | 7.8" (198 mm) |
| Spur Gear | 55T |
| Steering Type | 2WS |
| Suspension | Solid Axle, Front and Rear |
| Body | Axial Jeep JLU Hardtop, painted |
| Brakes | Integral with ESC |
| Pinion | 10T |
| Scale | 1/24 |
| Motor Type | Brushed |
| Speed Control | Included |
| Wheelbase | 5.2" (132 mm) |
| Charger | Included |
| Differential | Worm Gear 16T/4T |
| Receiver | Included |
| Shock Type | Coil-over, oil-filled |
| Power Type | Electric |
| Servos | Included |
