The legendary TEN was known around the world as one of the toughest platforms on the planet. Taking on any terrain, these trucks and buggies threw the gauntlet down on off-road excitement. The Losi® TENACITY® DB Pro 1/10-scale 4WD Buggy is a continuation of that dominance. The TENACITY DB Pro includes a full metric hardware package and aluminum features the competition sells as option parts. This desert buggy features all the technological advances drivers demand including the Spektrum™ Smart 130A Brushless ESC and Spektrum Firma® 4-Pole 3150KV 550 Motor allowing you to hit 50+ MPH with a 3 cell LiPo battery. Of course, the ESC is waterproof, completely programmable and comes pre-wired with a high-current IC5™ connector. Drivers stay in control with a Spektrum DX3™ 3-Channel DSMR® Radio System, a Spektrum AVC® receiver, and scale-to-size Falken Wildpeak MT tires and Method wheels. Finally, the TENACITY DB has a scale-inspired Desert Buggy body along with a new wing and off-road buggy inspired wheel design that looks good in the backyard and out in the desert blasting berms. You get all this and more from the brand that represents the pinnacle of performance.
The legendary, high-performance TEN platform features a super-tough aluminum chassis and the ability to adjust the TENACITY DB Pro's suspension and drivetrain for any condition.
The ESC is waterproof, completely programmable and comes pre-wired with a high-current IC5 connector. The ESC will work with most sensorless brushless motors and is 2S-3S LiPo and Ni-MH compatible.
The brushless ESC and motor provide wicked power with a 3 cell LiPo battery (not included) that will blaze speeds of 50+ MPH.
The TENACITY DB Pro is loaded with waterproof electronics including the receiver, servo and ESC. Everything is sealed against the elements allowing you to splash in the rain, spin in the mud and make tracks in the snow. It's full-throttle freedom to run anytime, rain or shine
Adjustable oil filled coil-over aluminum shocks on all four corners soak up the gnarliest terrain. The 12mm shocks are fully-adjustable and allow you to tune the handling of the TENACITY DB Pro to maximize performance and dominate anywhere.
The foundation of the TENACITY DB Pro consists of a 3mm, anodized aluminum chassis plate with a composite upper deck. For added durability and performance it's integrated with a realistic roll cage made of super-tough composite material. Whether you are hitting the whoops, getting huge air, or just wide open, the 3mm chassis just keeps asking for more!
Officially licensed Fox Racing and Lucas Oil trim schemes bring authentic scale details to the TENACITY DB Pro. These will have racers doing double takes as they take on all comers.
The fun doesn't stop even when the sun goes down with the TENACITY DB Pro. Brilliant LED lights on the integrated light bar cast more than enough illumination for running at night.
The Spektrum™ DX3™ radio system offers advanced features like AVC control, a 3-position throttle limiting switch and travel adjust. It features exclusive DSMR® technology for superior range, response, and interference resistance. It's also fully compatible with the Smart telemetry potential provided by the vehicle's installed Spektrum Firma™ Smart 40A ESC/receiver, and has a convenient voltage level indicator for any Spektrum Smart batteries!
The receiver's built-in AVC® (Active Vehicle Control®) traction control system works behind the scenes, making hundreds of throttle and steering adjustments per second, so more of the motor's power is translated into ballistic speed and acceleration instead of just flying dirt. The patent-pending AVC system adds a level of performance that simply cannot be found with any vehicle from any manufacturer other than Horizon Hobby. Like traction control in your full-scale vehicle, you can activate or deactivate the system on the fly and adjust the level of stability based on driving conditions. Any RC vehicle can go fast and with AVC you can go faster while maintaining optimum stability in all driving conditions.
| Receiver | Included |
| Shock Type | 12mm Aluminum |
| Charger | Sold Separately |
| Differential | Sealed Spiral Cut Bevel |
| Battery | Sold Separately |
| Ground Clearance | 1.50in |
| Internal Gear Ratio | 3:89:1 |
| Motor Size | 550 4 pole 3150Kv |
| Product Length | 21.1" (536 mm) |
| Spur Gear | 40T |
| Suspension | Independent |
| Wheel Width | 1.63 in (41.4mm) |
| Front Track | 11.5" (292mm) |
| Vehicle Size | Standard |
| Inner Tire / Outer Wheel Diameter | 2.2 / 3.0 in |
| Product Width | 11.7" (297 mm) |
| Radio | Included |
| Technology | AVC and SMART |
| Power Type | Electric |
| Gear Pitch | MOD1 |
| Servos | Included |
| Product Weight | 6lb (2.72kg) Without Battery |
| Tire Tread | Falken Wildpeak M/T |
| Vehicle Type | Desert Buggy |
| Final Drive Ratio | 9.73:1 |
| Motor Type | Brushless |
| Rear Track | 11.5" (292mm) |
| Speed Control | Included |
| Wheelbase | 13.1" (333 mm) |
| Body | Screened |
| Pinion | 17T |
| Scale | 1/10 |
| Chassis | 3mm Plate, 6061-T6 Aluminum |
| Completion Level | Ready-To-Run |
| Drivetrain | 4WD |
| Drive Type | Forward/Brake/Reverse |
| Product Height | 6.89" (175 mm) |
| Sensored | No |
| Top Speed | 50+ |
| Tire Compound | Medium-Soft |
