Mamba X Combo w/ ESC /1900Kv

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC
with the 1406 4-Pole 1900Kv Sensored Brushless Motor.

ESC:
2S - 6S input voltage range
Compatible with 1/10 - 1/8 scale vehicles weighing less that 9lbs
(4kg), including many extreme 1/10 scale setups and 1/8 scale race
buggies
Smartsense uses motor's sensors for smooth starts, excellent torque
and low-speed drivability - then transitions to the sensorless
mode with electronic timing, Smartsense automatically advances
timing for peak performance during all driving conditions
On-the-fly adjustments can be made through the AUX wire once enabled
in Castle Link, then settings can be tuned from transmitter while
driving
Recordable real-time data such as RPM, battery current and voltage,
ESC and motor temperature, throttle input and more
Audible alerts
CNC aluminum case
12AWG high strand count silicone insulated battery wires

Motor:
For 1/10 scale rock crawlers using 3-4S LiPo batteries and weighing
less than 8lbs (3.6kg), may also be used in more aggressive
setups in lighter 1/10 scale touring cars, stadium trucks or
buggies weighing up to 5lbs (2.3kg)
4 pole 12 slot design for high degree of efficiency and less heat
SMARTSENSE uses motor's sensors to provide smooth starts, excellent
torque and low-speed drivability-once motor is turning it
transitions to sensorless mode
ROAR standard sensor port and labeled connections
High performance 0.2mm steel lamination stacked stator
CNC machined anodized 6061 T-6 aluminum motor can and endbells
Rebuildable design allows replacement of front end bell/bearing
assembly or rotor/shaft assembly
One year limited warranty through Castle Creations beginning at date
of purchase

Mamba X Extreme 1/10 scale Electronic Speed Control
Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,
and Waterproof Switch
Replaceable Motor Sensor Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated Bullet Motor Connectors
1406 4-Pole 1900Kv Sensored Brushless Crawler Motor

Battery connectors to match selected battery

ESC,
Input Voltage Range: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to
run

Motor,
Input Voltage Range: 3-4S LiPo
Kv: 1900
Max RPM: 100,000
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight: 6.9oz (197g)
Shaft Length: 0.59" (15mm)
Shaft Diameter: 1.8" (3.17mm)
Mounting Hole Specs: M3 @ 25mm
Connectors: 4mm Male Castle Bullet Connectors attached to 13 gauge
wire
Sensor Wire Length: 8.3" (210mm)