Mamba X WP SCT 5700kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,
and the 1406 5700Kv Sensored Brushless Motor.
NOT for use in 4WD short course trucks.

For 2WD short course trucks on 2S LiPos geared conservatively,
1/10 scale 2WD stadium trucks and buggies on 2S for bashing and
limited runs on 3S LiPos with conservative gearing, also ideal for
1/10 scale on road cars running on 2S and 3S LiPo power.

ESC;
2S - 6S input voltage range
Compatible with 1/10 - 1/8 scale vehicles weighing less that 9lbs
(4kg), including many extreme 1/10 scale setups and 1/8 scale race
buggies
Smartsense uses motor's sensors for smooth starts, excellent torque
and low-speed drivability - then transitions to the sensorless
mode with electronic timing, Smartsense automatically advances
timing for peak performance during all driving conditions
On-the-fly adjustments can be made through the AUX wire once enabled
in Castle Link, then settings can be tuned from transmitter while
driving
Recordable real-time data such as RPM, battery current and voltage,
ESC and motor temperature, throttle input and more
Audible alerts
CNC aluminum case
12AWG high strand count silicone insulated battery wires

Motor;
High-strength neodymium sintered magnet with Kevlar wrap
High-performance 0.2mm steel lamination stacked stator
Castle 13 AWG silicone insulated wire leads
Oversized NMB bearings
Four pole configuration for maximum efficiency at high RPM
CNC machined 6061-T6 aluminum front and rear endbells

Mamba X Extreme 1/10 scale Electronic Speed Control
Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,
and Waterproof Switch
Replaceable Motor Sensor Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated Bullet Motor Connectors
1406 5700Kv Sensored Brushless Motor
Sensor Wire

ESC (CSEM9500);
Input Voltage Range: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
downloadable Casle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to
run

Motor (CSEC5700);
Input Voltage Range: 2-3S LiPo,
Kv: 5700
Max. RPM: 100,000
Max. Recommended Vehicle Weight: 5lbs (2278g) with battery RTR
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight with Wires: 7.1oz (202g)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet

Waterproof under normal operation. Not intended for operation when
completely submerged in water.