600 Series WP BL 1/10 Servo

Overview

High-Torque 600 Brushless Digital Servo

The Traxxas High-Torque 600 brushless servo is the ultimate steering upgrade for your 1/10 or 1/8 scale vehicle. With 600 oz-in of torque at 6 volts and a staggering 700+ oz-in or torque at 7.4 volts, the High-Torque 600 has ample power to turn even the heaviest trucks with authority. The High-Torque 600 includes a long list of high-performance features including full steel gears, ball bearings, and a finned aluminum case for added heat dissipation.

The Power to Perform

The High-Torque 600 servo is fully waterproof, not just “water resistant” and drops into most 1/10 and 1/8 scale Traxxas vehicles. With almost 5 times the power of a standard 2075 servo, the High-Torque 600 delivers maximum steering authority and speed for high-demand vehicles like Sledge®, Raptor R™, Revo®, and lifted TRX-4® models with 2.2″ wheels and tires. With a quick transit time of 0.13 sec/60° at 6.0 volts, the High-Torque 600 works great with TSM® equipped vehicles to produce fast, responsive handling.

For TRX-4 Installation

The Traxxas High-Torque 600 servo represents a huge power upgrade for TRX-4 and TRX-6. When installing this servo, it is required that you use the high-power BEC kit 2262. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.

• High-power BEC boosts receiver power for even the most demanding servos.
• BEC fits inside the extended receiver box for fully waterproof protection.
• Kit includes BEC, receiver box lid, Y-harness, and mounting hardware.

Waterproof Not "Water Resistant"

Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.

HIGH-TORQUE 600 FEATURES

• Easy drop-in installation into most Traxxas 1/10 and 1/8 models*
• Fully waterproof, not “water resistant”
• Compatible with Traxxas Stability Management® (TSM)
• 580 oz-in torque and 0.13 sec/60° at 6.0 volts
• 705 oz-in torque and 0.09 sec/60° at 7.4 volts
• Full steel gears
• Full ball bearings
• Brushless motor technology
• Finned aluminum case

APPLICATION GUIDE

• Compatible with most Traxxas 1/10 and 1/8 scale electric models*
• Compatible with TRX-4 models using high power BEC Kit 2262 and 8247X metal servo horn
• Compatible with Traxxas nitro models using rechargeable 5-cell battery packs
• Compatible with Maxx using adapter 7749 and servo arm from 5345R
• Not recommended for X-Maxx or XRT

SPECIFICATIONS

Motor Type: Brushless

Operating Voltage: 6.0 - 7.4 volts

Speed:

• 0.13 sec/60° at 6.0 volts
• 0.09 sec/60° at 7.4 volts

Torque:

• 600 oz-in at 6.0 volts
• 705 oz-in at 7.4 volts

Weight: 64 g

Gears: Metal

Output Spline: 25T

Case: Finned aluminum

Controller: Digital

*Does not fit 4-Tec® models, XO-1®, Unlimited Desert Racer®, Spartan®, or Jato®. Other models may require minor trimming.