FREE SHIPPING* on orders over $80 within Canada, exceptions apply. DetailsFREE SHIPPING* on orders over $80
Build volume: 310×310×400（mm）
Printing speed: 20-250mm/s
Printing accuracy: ± 0.1 mm
Suggest Material: 1.75mm PLA,PLA+，carbon fiberABS（low temp）, PETG, HIPSWOOD,PCL,TPU
Operating noise: ≤ 58 dB
Nozzle temperature: ≤ 500 °F / 260 °C
Heated bed temperature: ≤ 212 °F / 100 °C
Machine Dimension: 600×490×640（mm）
Machine Weight: 11.56KGs
Easily control sunlu filadryer S1 through the printer's screen. All settings only needs one-click.
If the nozzle is clogged, clogging detection will work and stop printing. S9 Plus will restart printing until you clean the nozzle.
Printing size is reaching to 310*310*400mm. Creating a world for imagination to run wild.
S9 Plus has installed ABL function and supports 4x4 multi-point automatic leveling. Completely solve the problem of printing failure caused by uneven heating plate.
The print bed locks parts down during printing when hot, and after cooling parts can be took off easily. It can be used repeatedly without loss of performance.
Double thread Z-axis moving parts to reduce printing wobbles.
Filament runout sensor can monitor the supply of filament intelligently. If your printer runs out of filament or filament breaks, it will automatically stop without losing your printing progress.
SUNLU provides various kinds filaments, which has even and smooth output, giving you more choices for your creativity.
Create a new custom printer profile with these settings:
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning
G1 X0 Y{machine_depth} ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
