The Axial rig that set the bar for 1/10 trail buggies has raised it again, now adding a lower gear ratio transmission for even better crawling. Ready for any trail, obstacle, or hill, the Capra doesn’t compromise. It’s better than the competition in every way.
The Axial UTB10 Capra 1.9 4WS 4X4 Unlimited Trail Buggy isn't for overlanding or Sunday drives. This is a true rock crawler, meant for the most challenging trails and obstacles. It's the Axial rig that set the standard for 1/10 scale trail buggies — and now, it has raised the bar once again.
Highlighting this next-level 1/10 scale trail buggy is an all-new transmission with lower gearing for even better crawling capabilities. That feature joins many others — including 4-wheel steering, portal axles, Spektrum electronics, and Pro-Line OE (Original Equipment) tires and wheels — to make the Capra superior to its competition in every possible way. This rig is ready for any trail, obstacle, or hill. It's a crawler that doesn't compromise.
This updated Capra has an improved final drive ratio of 45.37:1 (6.31 internal) compared to 31.4:1 (4.37 internal). This is 45% lower than the previous model, vastly improving the climbing ability and power of this rig.
The Capra's 4-wheel steering (4WS) is such an advantage compared to 2-wheel steering (2WS) crawlers that it may almost feel like cheating! Using the third channel button of the included Spektrum DX3 transmitter, you can steer the rear axle full left, straight, and full right to position the tires perfectly for conquering obstacles. The user can program the DX3 to enable a 5-position rear steer switch for even for more tunability. In full-scale crawling competition, such subtle maneuvering is a must to avoid losing points from reversing or hitting a marker on the course. With the Capra, you experience more true rock crawling realism.
The Capra's tube chassis not only looks like a real trail buggy, but is optimized for suspension and tire clearance. Licensed Currie F9 Portal Axles also increase ground clearance while turning the scale Pro-Line OE Holcomb 1.9 wheels and Pro-Line OE Mickey Thompson Baja Pro X tires. The tires feature aggressive tread for out-crawling the competition. Dual stage, open cell foam inserts are included, with soft outer foam and firm inner foam to improve grip and sidewall support. Both axles feature metal universals for a smooth, efficient, and durable drivetrain.
Nothing more is needed to complete the ready-to-run Capra except your choice of battery and charger. The included Spektrum DX3 transmitter is fully compatible with the Smart telemetry potential of the rig's Spektrum Firma 40A ESC and Spektrum SR515 DSMR 5-channel receiver. The electronics are protected by a waterproof and dustproof design.
It wasn't easy making the best even better, but Axial has done exactly that. Don't settle for a look-a-like copy. Get the rig that set the bar for 1/10 trail buggies and has now raised it again — the Axial UTB10 Capra 1.9 4WS 4X4 Unlimited Trail Buggy.
Tackle tougher terrain and more obstacles with the aggressive tread of officially licensed Mickey Thompson Baja Pro X Pro-Line OE tires. They're mounted on scale Pro-Line OE Holcomb 1.9 wheels, helping you to out-crawl the competition and look great doing it. Dual stage, open cell foam inserts are also included, with soft outer foam and firm inner foam to improve grip and sidewall support.
This updated Capra has an improved final drive ratio of 45.37:1 (6.31 internal) compared to 31.4:1 (4.37 internal). This is 45% lower than the previous model, vastly improving the climbing ability and power of this rig. The Capra is ready for any trail, hill, or obstacle.
Trail buggies with 2-wheel steering (2WS) don't stand a chance against the 4-wheel steering (4WS) of the Capra. Being able to steer with the front and rear axles gives you an enormous advantage. Using the third channel button of the included Spektrum DX3 transmitter, you can steer the rear axle full left, straight, and full right to position the tires for easy and fast maneuverability.
Licensed Currie F9 portal axles increase ground clearance and durability, giving the Capra another edge over standard axle trail buggies. The axles are designed specifically for the best performance when crawling, offering over 45% of steering with extra ground clearance. The improved, "ramp style" third member also reduces hang ups.
The tube chassis design captures the realistic scale looks of a rock crawler buggy and is optimized for generous suspension and tire clearance.
Axial has fine-tuned the Capra suspension geometry with a smooth, flexible, and durable design to achieve the best crawling capabilities.
The included Spektrum DX3 transmitter features exclusive DSMR technology for superior range, response, and interference resistance. It's also fully compatible with the Smart telemetry potential provided by the rig's stand-alone Spektrum Firma 40A ESC and Spektrum SR515 DSMR 5-channel receiver.
The shock bodies are threaded and anodized for a smooth, long-lasting finish. Adjust the dampening to your optimal suspension settings by increasing or decreasing the spring pre-load, simply by rotating the threaded shock collars.
Each end of the Capra is equipped with a waterproof, 25T Spektrum S683 metal-gear servo to steer the front and rear axles.
All links and suspension pivots are made of rust-proof stainless steel and provide precise, durable suspension points.
Delivering an even balance of speed and technical crawling, the included 540 size, 35T Axial motor features a hassle-free design with enlarged cooling ports for extended periods of crawling.
Both axles feature metal universals that deliver smooth action for an efficient and durable drivetrain. The universals provide 45 degrees of steering.
The Capra comes assembled and includes a transmitter, receiver, ESC, motor, two steering servos, and even “AA” transmitter batteries. All you need to supply is a battery and charger.
| Approximate Assembly Time | No assembly required |
| Ball Bearings | Complete Vehicle |
| Battery | Sold Separately |
| Body | Screened, Polycarbonate |
| Charger | Sold Separately |
| Chassis | Injection Molded Tubular |
| Completion Level | Ready-To-Run |
| Connector Type | EC3, IC3 |
| Differential | Locked |
| Drive Type | Forward/Brake/Reverse |
| Drivetrain | 4WD |
| Final Drive Ratio | 45.37:1 |
| Front Track | 8.87 in (225.3 mm) |
| Gear Pitch | 32-Pitch |
| Ground Clearance | 3.33 in (84.65 mm) |
| Inner Tire / Outer Wheel Diameter | 1.9 in |
| Internal Gear Ratio | 6.31:1 |
| LiPo Compatibility | 2S, 3S |
| Motor Size | 540 |
| Motor Type | Brushed |
| Pinion | 14T |
| Power Type | Electric |
| Product Height | 9" (229 mm) |
| Product Length | 17.4" (442 mm) |
| Product Weight | 4.5 lb (2.04 kg) |
| Product Width | 10.7" (272 mm) |
| Radio | Included |
| Rear Track | 8.87 in (225.3 mm) |
| Receiver | Included |
| Scale | 1/10 |
| Servos | Included |
| Shock Type | Aluminum Oil-Filled/Coil-Over Spring |
| Speed Control | Included |
| Steering Type | 4WS |
| Suspension | 4-Link Solid Axle |
| Tire Compound | Soft |
| Tire Tread | Pro-Line OE Licensed Mickey Thompson Baja Pro X Tires |
| Track Surface | All-Terrain / Backyard |
| Vehicle Size | Standard |
| Vehicle Type | Rock Crawler, Trail Buggy |
| Wheel Width | 1" (25.4 mm) |
| Wheelbase | 12.7" (323 mm) |
Note: This is not a comprehensive list of all parts or accessories and even though we try our best to keep this list accurate, compatibility is not guaranteed. Please consult the manual for your vehicle, the manufacturer, or contact us here at Hobby Wholesale to confirm compatibility if you are unsure.
If you are looking for a manufacturer part that is not in this list, please contact us for a special order.
