Aimed towards the serious RC rock crawler enthusiast, the new Enduro Knightrunner 4x4 RTR is packed full of performance features and concourse scale realism that are sure to impress.
The Knightrunner 4X4 RTR features injection-molded grill, mirrors, door handles, wipers, and more to heighten the scale realism of the thermoformed polycarbonate body designed by James Knight of Knight Customs. The extra decal sheet includes additional overlanding graphics and sponsor logos to outfit the Knightrunner 4X4 for a custom look.
Element RC has partnered with industry-leading aftermarket manufacturers to provide the highest level of scale realism possible. These partners include: DeMello Off-road, Front Runner™, Magnaflow™, and General Tire™.
When you want a rig designed with scale looks and performance in mind, you want the all-new Enduro Knightrunner 4x4 RTR overland truck!
At the center of the Knightrunner 4X4 chassis is Associated Electrics' revolutionary Stealth® X transmission. What makes this transmission different from others is the ability to adjust the front and rear drive ratios independently across three different levels. Out of the box, the Stealth® X comes pre-installed with the 5.7% overdrive gears. As an added bonus, the 11.83% overdrive gears are included, but not installed. Available separately are a one-to-one ratio option for those who wish to drive the front and rear equally.
Like all other Element RC vehicles, the Knightrunner comes fully equipped with performance-driven Reedy Power electronics. The Reedy SC480X ESC with T-plug connector and 16-turn 5-slot brushed motor combo deliver ultra-smooth power to the wheels. Guiding the Knightrunner on trail are the XP130 3-channel 2.4GHz radio and high-torque, metal-gear 1320MG Reedy servo.
Gripping the trail are a set of officially licensed General Grabber™ A/T X tires. All of Element RC's tires are molded in a soft, high-performance rubber that was selected for all-around grip performance and wear characteristics. The General Grabber™ A/T X tires are mounted on Urbine 1.55" beadlock wheels. No more worrying if your RTR tires will come unglued.
Threaded aluminum and fluid-filled, these shocks keep the vehicle stable on the trail and retain fluid even in the roughest terrain.
With durability, performance, agility, and scale looks in mind, the engineers at Area 51 Design Works came up with the Independent Front Suspension conversion kit. Now you can get that same kit in an RTR vehicle. Pre-assembled with the same quality and features, this trail truck comes equipped with IFS and is scale ready to tackle rough off-road terrain right out of the box.
100% compatible with steering blocks from previous Enduro chassis and allows up to 45º of steering.
The water-resistant SC480X brushed ESC is specifically programmed for crawling with proportional forward/reverse, dual auxiliary power output leads, LiPo low-voltage cutoff protections, and T-plug connector.
The Reedy Power 5-slot 16-turn brushed crawler motor provides ample torque with a smooth power delivery. This allows for slow precise acceleration while maintaining consistent power over rough terrain and obstacles.
| Battery | Sold Separately |
| Body | Painted Knightrunner Body |
| Charger | Sold Separately |
| Completion Level | Ready-To-Run |
| Drive Type | Forward/Brake/Reverse |
| Drivetrain | 4WD |
| Gear Ratio | 3.75:1 Axle Ratio |
| Inner Tire / Outer Wheel Diameter | 1.55 in |
| Motor Size | 16-turn |
| Motor Type | Brushed |
| Power Type | Electric |
| Product Length | 18.18" (462 mm) |
| Product Width | 9.29" (236 mm) |
| Radio | Included |
| Receiver | Included |
| Scale | 1/10 |
| Servos | Included |
| Shock Type | Fluid-filled Aluminum Shock Bodies |
| Speed Control | Included |
| Suspension | Independent Front Suspension |
| Tire Type | General Grabber™ A/T X tires |
| Track Surface | Rock Crawling |
| Vehicle Type | Rock Crawler |
| Water-Resistant | No |
| Wheel Hex Size | 12mm |
| Wheel Width | 9.29In |
| Wheelbase | 12.8" (325 mm) |
