Stampede® 4X4 VXL is back–bigger and stronger than ever before! Backed by the massive torque of the Velineon® 540XL motor, Stampede muscles its way over the toughest obstacles and reaches speeds of 60 mph and beyond. Stampede 4X4 comes outfitted to shred any terrain with the strength of Traxxas’ Extreme Heavy Duty Upgrade Kit and aggressive grip of its huge 5.3″ Sledgehammer® tires. Drive harder, go faster, hang tougher—nothing stops Stampede 4X4 VXL!
Traxxas uses technology and innovation to deliver a fun and exciting RC experience with more power, speed, and convenience than you ever thought possible.
Engineered for maximum strength, the Extreme Heavy Duty Upgrade Kit fortifies Stampede 4X4 with a full complement of driveline and suspension parts designed to work together as a complete package. Combined with Traxxas’ HD suspension arms, Stampede sets a new standard for brushless durability.
Stampede 4X4 VXL rides tall on large 5.3″ Sledgehammer tires for that classic monster truck profile. With nearly 3 inches of center ground clearance, Stampede goes places other trucks can’t. The long 11.62″ (295 mm) wheelbase increases high-speed stability. Short front and rear overhangs place bulk of Stampede’ weight between the wheels for sharp turn-in response and improved handling.
Stampede 4X4 VXL uses Traxxas’ patented Self-Righting feature to keep the fun going, even when you get carried away with the wheelies or land upside down. Simply press a button on the TQi™ transmitter and, in most circumstances,* Stampede 4X4 VXL will be back on its wheels in just seconds and ready for more action! *3s LiPo battery required.
Stampede 4X4 VXL’s rugged and innovative clipless body latching system delivers secure mounting and easy one-handed removal. Battery changes are fast and there are no body clips to keep up with. The internal body cage with integrated roof skid and tailgate protector strengthen the body for extra-long life.
A tough internal cage structure supports the body, and outer reinforcements enhance the aggressive look. Roof and tailgate skids protect against wear-through from skidding, while reinforcements at the mounts prevent tear-through.
Traxxas gives you the freedom to drive the Stampede 4X4 VXL on your terms, regardless of the weather. Thanks to Traxxas’ patented innovative waterproofing solutions, water, mud, and snow won’t slow down the Stampede 4X4. Drive where you want, when you want—the only limit is your imagination.
A wheelie bar is mandatory equipment to handle the Stampede 4X4 VXLs’ wheel-standing torque. Ride practically never-ending wheelies on pavement and keep the wheels-up action under control during hard acceleration. The integrated wheelie bar has the perfect amount of flex to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Stampede to the next adventure.
The high-output Traxxas TQi™ 2.4 GHz radio system delivers superior range, 30-model memory, and maximum control. Add sensors and the Traxxas Link Wireless Module, (both sold separately) to send real-time telemetry to your smart phone using the free Traxxas Link™ app.
The Torque-Biasing Center Drive absorbs shocks to improve driveline durability. The center drive also distributes power to all four wheels for mind-bending four-wheel drive acceleration without the side effects of a typical center differential. Center differentials allow tires in the air to balloon uncontrollably, while the Torque-Biasing Center Drive allows wheelies off the line with seamless power distributed to all four wheels.
Stampede 4X4 VXL’s massive Velineon 540XL brushless motor is 25% longer than the standard 3500 kV Velineon brushless motor for nearly limitless wheel-standing torque at your command. The waterproof VXL-3s speed control delivers up to 11.1-volts of LiPo power through oversized 6.5mm connectors. The ESC is fan-cooled and packed with innovative convenience and safety features, making the VXL-3s just as powerful as it is easy to use.
TSM works behind the scenes to help harness Stampede 4X4 VXL’s extreme brushless power for maximum acceleration and ultra-precise control. Adjust the amount of assistance from off to 100% right from your transmitter.
MODEL 90376-4: Stampede 4X4 VXL: 1/10 scale 4X4 monster truck, fully-assembled, waterproof electronics, Ready-To-Race®, with TQi™ 2.4 GHz 2-channel radio system, Traxxas Stability Management (TSM)®, VXL-3s™ speed control, 540XL brushless motor, and clipless painted ProGraphix® body. Requires: battery and charger.
Clipless ProGraphix® Body
Extreme Heavy Duty Upgrade Kit Installed
Up to 60+ mph with 3s LiPo battery
TQi™ 2.4 GHz High Output Radio System
TQi 2-channel transmitter
VXL-3s™ Waterproof Electronic Speed Control
Velineon® 540XL Brushless Motor
Traxxas Stability Management® (TSM)
Chassis
Drivetrain
Steering
Suspension
Wheels and Tires
Sealed Ball Bearings
Hex hardware with Rust-Resistant Black Oxide Coating
For those who believe “there’s no replacement for displacement,” Traxxas has built a monster truck for you. Stampede 4X4 VXL packs the same Velineon 540XL brushless motor found in the Maxx® extreme monster truck. It’s the largest motor we’ve ever offered in a truck this size. The Velineon VXL-3s™ speed control rolls out the power smoothly utilizing large 6.5 mm connectors and an integrated cooling fan for fast, reliable fun.
Along with added power, Stampede 4X4 VXL also gets a massive boost in strength with its factory-installed Extreme Heavy Duty Upgrade Kit. The kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
Stampede 4X4 VXL relies on huge Sledgehammer tires to put its massive torque to the ground. The 5.3″ tall Sledgehammers lift Stampede skyward for superior ground clearance and a menacing stance. The open-block tread design clears away mud and debris for unrivaled traction on loose surfaces. Sledgehammer tires come pre-glued with performance foam inserts and they’re TSM®-rated for speeds of 60 mph and beyond!
Tough reinforced bumpers protect the chassis against impacts. The specially designed front bumper provides a high approach angle that allows Stampede to climb up and over obstacles with ease. The rear bumper mounts a perfectly positioned wheelie bar to help prevent the Stampede 4X4 VXL from back-flipping under its explosive power.
Stampede 4X4’s aggressive monster truck ProGraphix® body comes trimmed and pre-painted with the decals already applied. Tough internal reinforcements maintain the body’s integrity while roof skids provide rollover protection to keep the body looking fresh.
Large 5.3″ Sledgehammer tires combine excellent ground clearance with true mud-slinging fun. The open-block tread design claws into gravel, dirt, and grass for sure-footed 4X4 traction on nearly any surface. The heavy-duty rubber compound is specially formulated to resist tearing and bonds exceptionally well to the aggressive black chrome wheels.
Stampede’s clipless ProGraphix body mounts on specially designed shock towers. The easy-to-use latch unlocks instantly with the quick swipe of a thumb and locks again with a noticeable detent to let you know it’s securely fastened.
Stampede 4X4’s modular design creates a chassis that’s both strong and easy to maintain. The front and rear bulkheads remove easily with just a few screws. In less than a minute using a power screwdriver, you’ll have full access for easy service and adjustment
Molded from our toughest composite material, Stampede 4X4 VXL’s heavy-duty suspension arms provide just the right amount of flex to resist breaking—even in cold weather! From skate parks to 10-foot ramps, these heavy-duty arms stand up to even the most punishing drivers for non-stop fun behind the wheel.
Stampede 4X4 VXL comes outfitted with the Extreme Heavy Duty Upgrade Kit already installed for ultimate strength and durability. The axle carriers, C-hubs, and steering blocks are beefed-up with more material and stronger construction.
Oil-filled Ultra Shocks™ utilize dual X-ring technology for a perfect seal and silky-smooth performance. The large oil capacity and rugged design soaks up big jumps and off-road abuse for smooth driving performance. They are easy to tune with a wide range of available oils, springs, and pistons.
The TQi 2.4 GHz radio system stores up to thirty models in memory, allowing you to use one transmitter for your entire RC garage. Integrated telemetry ports in the receiver transmit real-time data to the TQi transmitter when using the Traxxas Link™ App and telemetry sensors (sold separately). In the event of signal loss, the receiver automatically returns the throttle to neutral and holds the last steering position.
Stampede 4X4 VXL incorporates a waterproof receiver box in the nose of the chassis to save weight and provide a clean, high-tech appearance. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, Stampede is ready for action!
A dual-bellcrank design pivots on rubber-sealed ball bearings for smooth action in the harshest conditions. The integrated cam-type servo saver protects the servo gears from crash impacts without sacrificing steering precision.
Stampede 4X4 VXL’s extreme speed and tall Sledgehammer tires require a steering servo that’s both strong and durable. The waterproof 2075 digital high servo provides robust steering authority with ball bearings for precise control and quick reflexes.
The waterproof Velineon VXL-3s speed control is packed with technology to deliver maximum power. Large heat sink, integrated on/off switch, and three programmable drive profiles top the feature list. Two-stage low voltage detection allows full LiPo compatibility, including powerful 11.1-volt 3s packs!
A rugged battery hold-down secures the battery safely in the chassis without flimsy straps or clips to lose. A beefed up latch provides solid locking action to keep batteries safe no matter how wild the action gets.
Rugged side nerf bars protect the chassis from rocks and other impacts. Special channels in the nerf bars support the sides of the body for a tighter, more secure fit.
A sensorless Velineon 540XL 2400 kV motor delivers extreme performance with nearly zero maintenance. Ultra high-temperature Neodymium magnets, high-speed bearings, and a precision, 4-pole balanced rotor deliver smooth running and long life.
Fixed gear adapters take the guesswork out of setting your gear mesh. The fixed positioning keeps the gear mesh tight, even after the harshest landings. The innovative motor mount keeps the 540XL motor locked firmly in place with just a single screw for easy maintenance.
Stampede 4X4 VXL’s 4mm turnbuckles feature broad flat sections make toe and camber adjustments easy with the included wrench. The fully captured rod ends take a beating and won’t pop apart during rigorous off-road pounding.
Stampede 4X4 VXL’s Maxx-duty driveshafts with beefed-up U-joints are built to handle brushless power without breaking a sweat. Large 6 mm axles key into the included steel wheel hexes for unmatched strength and durability.
Sealed front and rear differentials utilize steel-gear internals for maximum durability. Silicone gaskets and X-ring seals allow you to tune the amount of locking action by varying the viscosity of the fluid inside the differentials.
A one-piece extruded aluminum driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies. Altogether, this shaft runs straight and true for ultra-smooth driveline operation.
Designed from the start to handle big brushless horsepower, Stampede 4X4 VXL’s driveline uses a rugged steel spur gear with large 0.8 module/32-pitch teeth for reliability no matter how much power you pour on.
Maximizing speed requires as little friction as possible. Stampede 4X4 VXL rides on precision rubber-sealed bearings for super low-friction performance and maximum protection in dusty environments. They are used throughout the truck and are virtually maintenance free.
| Length: | 20.24 inches (514 mm) |
|---|---|
| Width: | 13.10 inches (333 mm) |
| Ground Clearance: | 2.75 inches (70 mm) |
| Weight: | 6.3 pounds (2.9 kg) without batteries |
| Height: | 8.34 inches (212 mm) |
| Wheelbase: | 11.62 inches (295 mm) |
| Front Shock Length: | Long |
| Rear Shock Length: | XX-long |
| Tires (pre-glued): | 5.3″ (133 mm) tall Sledgehammer® |
| Wheels: | 2.8″ (71 mm) black chrome |
| Speed Control: | VXL-3s™ |
| Motor (electric): | Velineon® 540XL brushless |
| Transmission: | Single speed with Torque-Biasing Center Drive |
| Overall Drive Ratio: | 10.99:1 |
| Differentials: | Sealed, 2-gear |
| Chassis: | Modular composite tub |
| Brake Type: | Electronic |
| Drive System: | Shaft driven 4WD |
| Steering: | Dual bellcrank with integrated servo saver |
| Radio System: | TQi™ 2.4 GHz 2-ch transmitter with 6533 TSM® receiver |
| Servo: | Waterproof 2075 |
| Top Speed (optional gearing): | 60+ mph with 3-cell LiPo and 23/50 gearing |
| Skill Level: | 1 |
| Battery Compartment: | 162 mm x 47 mm x 26 mm*35 mm with optional battery strap (9026, sold separately) |
| Type: | Velineon 540XL 2400 kV sensorless brushless |
|---|---|
| Weight: | 11.18 ounces (317 g) |
| Length: | 3.58 inches (91 mm) |
| Diameter: | 1.41 inches (36 mm) |
| Connector Type: | Traxxas 6.5 mm bullet connectors |
| Input Voltage (cells): | 7.2 V (6–9 cells NiMH), 2s–3s LiPo |
|---|---|
| Case Size: | 2.19″ (56 mm) x 1.54″ (39 mm) x 1.65″ (45mm) |
| Weight: | 3.84 ounces (109 g) |
| BEC Voltage: | 6.0 volts |
| Reverse Delay: | Yes, with lockout |
| Thermal Protection: | Two-stage thermal shutdown |
| Ports: | Auxiliary fan |
Note: This is not a comprehensive list of all parts or accessories and even though we try our best to keep this list accurate, compatibility is not guaranteed. Please consult the manual for your vehicle, the manufacturer, or contact us here at Hobby Wholesale to confirm compatibility if you are unsure.
If you are looking for a manufacturer part that is not in this list, please contact us for a special order.
Alternative product SKU's: TRX903764ORNG, TRX 903764ORNG, TRA 903764ORNG, TRX90376-4ORNG, TRX 90376-4ORNG, TRA90376-4ORNG, TRA 90376-4ORNG, 90376-4ORNG
