SW4 BL WP Sensorless ESC 1406-4600 Combo

This is the Castle Creations Sidewinder 4 Sensorless Electronic Speed Control
for 1/10 scale Sport Applications and the 1406 4600Kv Sensored Brushless Motor.

For 2WD short course trucks on 2S LiPos geared conservatively,
1/10 scale 2WD stadium trucks and buggies on 2S for bashing and
limited runs on 3S LiPos with conservative gearing, also ideal for
1/10 scale on road cars running on 2S and 3S LiPo power.

**NOT For Use In 4WD Short Course Trucks.**

Sidewinder 4 ESC;
Recommended for 1/10 scale RC vehicles weighing up to 6.5lbs
(2.9kg)
Sensorless brushless and/or brushed motor compatibility
Can be powered by a 2-3S LiPo, or 6-8 NiMH battery
5V fixed, 2A BEC (battery eliminator circuitry)
Cryo-drive technology, a combination of software enhancements and
precision fluid dynamics offers reduced operating temperatures in
all applications
Redesigned case for optimum airflow
Compatible with the optional Castle Link USB programmer (not included
order CSEM6300
Large high-rate 30mm cooling fan
Waterproof in normal operation, see COMMENTS below;

1406 4600Kv Sensored Brushless Motor;
For 2WD short course trucks on 2S LiPos geared conservatively,
1/10 scale 2WD stadium trucks and buggies on 2S for bashing and
limited runs on 3S LiPos with conservative gearing, also ideal for
1/10 scale on road cars running on 2S and 3S LiPo power
Four pole configuration for maximum efficiency at high RPM

Sidewinder 4 ESC with two Receiver Wires with Standard Connectors
4mm Bullets for Motor Connection, On/Off Switch, Motor Wires
1406 4600Kv Sensored Brushless Motor, Sensor Wire and Instructions

Battery Plug and Pinion Gear depending on application

Sidewinder 4 ESC (CSEM6400);
Input Voltage Range: 2-3S LiPo, or 6-8 NiMH battery
BEC: 5.0 volts fixed, 2 amps
Brake: Proportional
Reversible: Yes, can be disabled for racing
Length: 2.08" (52.92mm)
Width: 1.50" (38.05mm)
Height: 1.28" (32.56mm)
Weight 2.26oz (64g)
Battery Lead Wire Size: 13 gauge
Telemetry Link Capable: Yes

1406 4600Kv Sensored Brushless Motor (CSEC5600);
Input Voltage Range: 2-3S LiPo
Kv: 4600
Max. RPM: 100,000
Max. Recommended Vehicle Weight: 5lbs (2278g) with battery RTR
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight with Wires: 6.9oz (197g)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet

Not intended for operation while submerged in liquid, fan is splash
resistant but should be removed from the ESC before prolonged
exposure to liquids.